PENGENDALIAN KUALITAS PRODUK STATOR EPOXY DENGAN MENGGUNAKAN METODE NEW SEVEN TOOLS DAN RELIABILITY CENTERED MAINTENANCE UNTUK MENURUNKAN KECACATAN PRODUK DI PT. TD AUTOMOTIVE COMPRESSOR INDONESIA
Keywords:
New Seven Tools, Reability Center, MaintenanceAbstract
PT. TD Automotive Compressor Indonesia, located in the MM2100 area, is a company engaged in the automotive industry, which produces a compressor with clutch. This company is very concerned about the quality of the products it produces, by meeting predetermined quality standards and specifications. However, it was found that there were several factors that caused the quality of the epoxy stator product to not meet the standards. Among the factors caused by Personnel, method, machine, work results and environment. Therefore, improvements are needed to reduce the reject Voltage Resistance, Resistance, and Fuse Over by using the New Seven Tools method to find the root causes of problems that often occur. So, the corrective action that needs to be taken to reduce the reject ratio of Epoxy Stator Products is by replacing a new Share Blade, and making a schedule for changing the Share Blade using the Reability Centered Maintenance method so as to minimize dull Share Blades that are still frequently used.
Downloads
References
Erni Yusnita,Chandradevi, A., & Puspitasari, N. B. 'Analisa pengendalian kualitasproduksi Botol X 500 ml pada PT. Berlina, Tbk dengan menggunakan Metode New Seven Tools.' Industrial Engineering Online Journal, ISSN:2549-6328 5(4), 1–9. (2020) https://ejournal3.undip.ac.id/index.ph p/ieoj/article/view/14114
Chandradevi, A., & Puspitasari, N. B. 'Analisa pengendalian kualitas produksi Botol X 500 ml pada PT. Berlina, Tbk dengan menggunakan Metode New Seven Tools.'Industrial Engineering Online Journal, E-ISSN : 3476-7654, 5(4), 1–9. (2016) https://ejournal3.undip.ac.id/index.ph p/ieoj/article/view/14114
Rahayuningtyas, W., & Sriyanto, S. 'ANALISIS PENGENDALIAN KUALITAS PADA PRODUK TAHU BAXO IBU PUDJI MENGGUNAKAN METODE NEW SEVEN TOOLS (Studi Kasus pada CV. Pudji Lestari Sentosa).' Industrial Engineering Online Journal, E-ISSN : 2476-7789, 6(4), 306–312. (2018)
Al Faritsy, A. Z., & Prasetiyo, H. H. 'Analisis Pengendalian Kualitas Produk Ember Cat Tembok 5 Kg Menggunakan Metode New Seven Tools (Studi Kasus: Indaplas-Pt. Indaco Warna Dunia).' Teknosains: Media Informasi Sains Dan Teknologi, P-ISSN:2829-0232, EISSN:2829-0038 16(2), 201–213. (2020) https://doi.org/10.24252/teknosains.v1 6i2.26956
Endik Wirawan, & Nur Muflihah. 'Integrasi Fmea Dan New Seven Tools Untuk Optimalisasi Penggunaan Bahan Bakar Boiler.' Jurnal Penelitian Bidang Inovasi & Pengelolaan Industri, E-ISSN:2808- 6740 2(1), 25–37. (2022)https://doi.org/10.33752/invant ri.v2i1.324
Arif, M, Bahan Ajar Rancangan Teknik Industri (1st ed.) (Yogyakarta: deepublish,2016)
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Indy Faiza Aulia, Kartiko Eko Putranto, Alfian Destha Joanda (Author)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
